Open Access Journal
U.S. ISSN 2693 -1389
U.S. ISSN 2693 -1389. RSE Press, 135 Meeting Place Road, Lawrenceville, GA 30044 USA (Currently no APC)
Information for Authors
Journal of Technological Science & Engineering (JTSE) has no restrictions on the length of manuscripts, provided that the text is concise and comprehensive. Full experimental/methodological details must be provided so that the results can be reproduced. It is understood that the Manuscripts submitted to the Journal of Technological Science & Engineering (JTSE) should neither be published before nor be under consideration for publication in another journal. Manuscripts should be submitted through the submission system of the Journal. Please use the Cover letter & Title page, and Annonymous Article templates available in the "Resource" menu of the homepage for preparing and submitting your manuscripts for the Journal. In case of any technical difficulty, you may submit through email to firstname.lastname@example.org.
1.0. Manuscript Preparation Summary
2.0. Article Types
3.0. Title Page
These sections should appear in all manuscript types
4.0. Structure of the Manuscript
5.0.Preparing Figures, Schemes, and Tables
Table 6: Result of the mediated model
COM=Compliance, JS=Job satisfaction, EE=Employee Engagement, VAF= Variance accounted for, Indirect effect (0.184) = a (0.513) times b (0.358), Total effect (0.341) = direct effect (c/=0.157) + indirect effect (0.184).
6.0. General Consideration
The authors must cite the relevant literature both in the text and references. The authors must cite the relevant literature both in the text and references. However, for references, authors are free to follow any standard format [APA, MLA, Chicago, IEEE, Harvard, etc]. But they have to be consistent in their style and in their reference list, they must mention categorically what style they followed for reference.
8.0. Publication Ethics
The Journal of Technological Science & Engineering (JTSE) spontaneously maintains ethical guidelines of the Committee on Publication Ethics (COPE). Journal of Technological Science & Engineering (JTSE) takes the responsibility to enforce a rigorous peer-review together with strict ethical policies and standards to ensure to add high-quality scientific works to the field of scholarly publication. Unfortunately, cases of plagiarism, data falsification, inappropriate authorship credit, and the like, do arise. Journal of Technological Science & Engineering (JTSE) takes such publishing ethics issues very seriously and our editors are advised to proceed in such cases with a zero-tolerance policy.
8.1. Research Involving Human Subjects
When reporting on research that involves human subjects, human material, human tissues, or human data, authors must declare that the investigations were carried out following the rules of the Declaration of Helsinki of 1975 (https://www.wma.net/what-we-do/medical-ethics/declaration-of-helsinki/), revised in 2013. According to point 23 of this declaration, an approval from an ethics committee should have been obtained before undertaking the research. At a minimum, a statement including the project identification code, date of approval, and name of the ethics committee or institutional review board should be cited in the Methods Section of the article. Data relating to individual participants must be described in detail, but private information identifying participants need not be included unless the identifiable materials are of relevance to the research (for example, photographs of participants’ faces that show a particular symptom). Editors reserve the right to reject any submission that does not meet these requirements.
Example of an ethical statement: "All subjects gave their informed consent for inclusion before they participated in the study. The study was conducted in accordance with the Declaration of Helsinki, and the protocol was approved by the Ethics Committee of XXX (Project identification code)."
Written informed consent for publication must be obtained from participating patients who can be identified (including by the patients themselves). Patients’ initials or other personal identifiers must not appear in any images. For manuscripts that include any case details, personal information, and/or images of patients, authors must obtain signed informed consent from patients (or their relatives/guardians) before submitting to the Journal of Technological Science & Engineering (JTSE) . Patient details must be kept anonymous as far as possible, e.g., do not mention specific age, ethnicity, or occupation where they are not relevant to the conclusions. A Patient Consent form is available to download. A blank version of the form used to obtain permission (without the patient names or signature) must be uploaded with your submission.
Alternatively, you may provide a detailed justification of why informed consent is not necessary. For the purposes of publishing in Journal of Technological Science & Engineering (JTSE), a consent, permission, or release form should include unlimited permission for publication in all formats (including print, electronic, and online), in sublicensed and reprinted versions (including translations and derived works), and in other works and products under open access license.
8.2. Publication Ethics Statement
Journal of Technological Science & Engineering (JTSE) fully adheres to the Code of Conduct and the Best Practice Guidelines of the Committee on Publication Ethics (COPE). The editors of this journal enforce a rigorous peer-review process together with strict ethical policies and standards to ensure to add high-quality scientific works to the field of scholarly publication. Unfortunately, cases of plagiarism, data falsification, image manipulation, inappropriate authorship credit, and the like, do arise. The editors of the Journal of Technological Science & Engineering (JTSE) take such publishing ethics issues very seriously and maintain a zero-tolerance policy.
Authors wishing to publish their papers in Journal of Technological Science & Engineering (JTSE) must abide by the following:
Plagiarism includes copying text, ideas, images, or data from another source, even from your own publications, without giving any credit to the original source.
Reuse of text that is copied from another source must be between quotes and the original source must be cited. If a study's design or the manuscript's structure or language has been inspired by previous works, these works must be explicitly cited.
If plagiarism is detected during the peer review process, the manuscript may be rejected. If plagiarism is detected after publication, we may publish a correction or retract the paper.
Irregular manipulation includes: 1) introduction, enhancement, moving, or removing features from the original image; 2) grouping of images that should obviously be presented separately (e.g., from different parts of the same gel, or from different gels); or 3) modifying the contrast, brightness or color balance to obscure, eliminate or enhance some information.
If irregular image manipulation is identified and confirmed during the peer review process, we may reject the manuscript. If irregular image manipulation is identified and confirmed after publication, we may correct or retract the paper.
Our in-house editors will investigate any allegations of publication misconduct and may contact the authors' institutions or funders if necessary. If evidence of misconduct is found, appropriate action will be taken to correct or retract the publication. Authors are expected to comply with the best ethical publication practices when publishing with the Journal of Technological Science & Engineering (JTSE).
8.3. Reproducing Published Material from other Publishers
It is absolutely essential that authors obtain permission to reproduce any published material (figures, schemes, tables, or any extract of a text) which does not fall into the public domain, or for which they do not hold the copyright. Permission should be requested by the authors from the copyright holder (usually the Publisher, please refer to the imprint of the individual publications to identify the copyright holder).
Permission is required for:
Permission is not required for:
8.4. Obtaining Permission
In order to avoid unnecessary delays in the publication process, you should start obtaining permission as early as possible. If in any doubt about the copyright, apply for permission. Journal of Technological Science & Engineering (JTSE) cannot publish material from other publications without permission.
The copyright holder may give you instructions on the form of acknowledgment to be followed; otherwise, follow the style: "Reproduced with permission from [author], [book/journal title]; published by [publisher], [year].' at the end of the caption of the Table, Figure or Scheme.
Journal of Technological Science & Engineering (JTSE) follows the International Committee of Medical Journal Editors (ICMJE) guidelines which state that, in order to qualify for authorship of a manuscript, the following criteria should be observed:
Those who contributed to the work but do not qualify for authorship should be listed in the acknowledgments. More detailed guidance on authorship is given by the International Council of Medical Journal Editors (ICMJE).
Any change to the author list should be approved by all authors including any who have been removed from the list. The corresponding author should act as a point of contact between the editor and the other authors and should keep co-authors informed and involve them in major decisions about the publication. We reserve the right to request confirmation that all authors meet the authorship conditions.
10.0. Submission Fee and Article Processing Fee
There is no submission or article processing fee charged by the Journal of Technological Science & Engineering (JTSE) .
11.0. Review Process
Manuscripts submitted to the Journal of Technological Science & Engineering (JTSE) are reviewed by expert reviewers. Once the submission is done, the editor will perform the initial screening. Upon the suitability of the manuscript, it will be sent to the reviewers. It will take 15 to 30 days to receive the first decision about the manuscript. Based on the reviewers’ comments, the author will have to respond within a month. Reviewers are asked to evaluate the quality of the manuscript and to provide a recommendation to the chief editor on whether a manuscript can be accepted, requires revisions, or should be rejected. Please click here for the review form.
12.0. Language Editing Services
Journal of Technological Science & Engineering (JTSE) strictly maintains a professional standard in writing and ensures that all the manuscripts have the correct language and style. The manuscripts that receive “Extensive editing of English language and style required” or “Moderate English changes required” must undergo language and style editing before they are accepted for publication. To facilitate the authors in this regard, the Journal of Technological Science & Engineering (JTSE) offers its in-house editing services at an economical cost. However, the authors are not obliged to avail of this service. They may get it done from elsewhere, should they opt for.
13.0. Article Template
Authors are required to use strictly the Microsoft Word template
For all articles published in the Journal of Technological Science & Engineering (JTSE), copyright is retained by the authors. Articles are licensed under an open access Creative Commons CC-BY 4.0 license, meaning that anyone may download and read the paper for free. In addition, the article may be reused and quoted provided that the original published version is cited. These conditions allow for maximum use and exposure of the work while ensuring that the authors receive proper credit.
In exceptional circumstances, articles may be licensed differently. If you have a specific condition (such as one linked to funding) that does not allow this license, please mention this to the editorial office of the journal at submission. Exceptions will be granted at the discretion of the publisher.
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.
Copyright (c) 2020 Journal of Technological Science & Engineering (JTSE)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Open Access Journal
U.S. ISSN 2693 -1389
The Journal Includes